Testimonials

I used Free All on bolts that were unable to break loose with other penetrating oils. It freed them in a matter of minutes and is the greatest rust eater I have ever used!

— Ron Mote, Piqua, Ohio

The BEST penetrating oil I’ve used in the 37 years I’ve been in business!

— Glenn York, Glenn York Auto Repair, Sidney, OH

Free All works great, friends and neighbors! I turned a sparkplug that I'd soaked for about week, and it turned easily! My attention then went to one of the loader’s hydraulic fittings that was badly rusted. I tried to turn it with a wrench but it wouldn't budge. I sprayed a little Free All and ten seconds later it started to move.

— Farmall Cub post

I love Free All! I had a pair of rusted cutters that wouldn't even pry apart with WD-40. I sprayed a little Free All on them and was able to open them with one hand. This is the best stuff ever!

— Teiah Hart, Doniphan, Missouri

This is one product that really works as advertised. I tested it on rusty fuel and brake lines against P.B. B’laster. Free All worked twice as fast and really did the job.

— Charles Carroll, Morrow, Ohio

Free All is truly amazing! I recently picked up a vintage Herter's Husky snowmobile that had a frozen motor after sitting for over 30 years. I removed the spark plugs, gave both cylinders a shot of Free All and let it soak in for about 10 minutes. I applied little pressure to the crank with a ratchet. The motor cracked loose and spun free. Not only did it free the motor up, but I was able to get it running about 10 minutes later. Thank you for making such a wonderful product!

— Adam Hanson, Pengilly, MN

I have been using Free All for about 11 years and it’s the best penetrating oil on the market!!!

— Janelle Lafaver, Fallbrook, California

It came in an aerosol can the same week I broke a ball joint on my 1994 pickup. The ball joint was an original equipment item, riveted in the factory. I soaked it with Free All, and ten minutes later, got to work. The ball joint came right out with one hit of the hammer.

— Dustin Wells, Reading, Pennsylvania

Free All arrived just at the right time. I was taking bumpers off a 1982 El Camino. The bolts were rusted on. The oil worked great.

— Kenneth Kilcore, Browns Mills, New Jersey

I needed to swap an engine in my 4WD pickup truck and did so using an engine from a front wheel drive car. I had to use the exhaust manifolds from the old engine, so needed to remove those from the replacement. The initial effort to break the bolts loose failed, and I feared I would break them off in the block. I doused the area on and around each bolt with Free-All® and tried again a couple of days later. The bolts turned right out without binding. Free-All® worked far better than the other penetrants I'd previously used.

— Steve Roed, Lino Lakes, MN

It worked and worked and worked. We used it on everything; screw heads, overhead doors - the can is empty.

— Ray, Monroe Muffler, Rochester, New York

I have a stubborn friend who couldn't get two bolts on the rear of the muffler to budge. I persuaded him to try Free All and we waited for approximately 20 minutes. He said he might as well get the torch and heat them, but he took the same wrench and took out both bolts with ease. From that moment on, he was a true believer in Free All and has purchased it ever since.

— Wayne Smith, Tiffin, Ohio

I can’t wait to order some more of this stuff! The day it came, I was sorting old nuts and bolts in my garage. I applied some of this oil to the rusty pile of parts and it cleaned the rust off and made [them] useable again! Now I use it everywhere!

— Richard Hebner, Rochester, New York

The cylinder slide on my revolver pistol was just about impossible to move. Once I sprayed it with Free All, it only took about 30 seconds and it was like new. I own a cattle and timber farm, and I use this product on a number of different applications there as well. It's a fantastic product that I am completely satisfied with.

— William Mount, Mathews, AL

Free All is unbelievable! My 22.5-inch highway tractor wheels were stuck so I decided to soak the mounting flange area with Free All. I let it sit for a little and the wheel practically fell off! Free All is unbelievable and a must have for my shop.

— Brian Sumner, Winnipeg, Manitoba

I use free all for everything I my shop. I'm 50-percent roadside repair and 50-percent in the shop, all day every day. Sometimes the torch isn't handy or I'm working in an area that won't allow me to use it, and that's when I grab Free All. When I get an over-the-road truck and trailer that rolls in, I immediately soak the area I'm going to work on. When I need to punch holes, I use Free All as a cutting oil. I run it in all my pneumatic tools and I spray all my hand tools down when I work out in the rain.

— Alex Krumm, Hilmar, CA

The enclosed business card said it all! ‘This stuff will amaze you!’ Frees everything without torches or hammers. I let it soak in and the bolts loosened right up.

— Edward J. Andrew, Orland Park, Illinois

I bought a flooded multipurpose tool and have been trying to restore it to working condition. Rust, bi-metallic corrosion, more rust; you name it. I sprayed some Free All on, came back later, and the previously corrosion-welded parts were practically crawling away from each other. Absolutely amazing result! Thank you for putting out a product that actually does what it claims. Doesn't happen often!

— Tom Gould

I sprayed the hinge on a door and to this date (2 weeks later), no more squeaking. Works fantastic on rusted bumper bolts!

— Donald Felger, Fort Wayne, Indiana

I have used several similar products but none have impressed me like Free All – especially on exhaust and other fasteners. Great product. I wish this stuff was around years ago. It would have saved a lot of busted knuckles.

— William Gross, Valparaiso, Indiana

I had some rusted bolts holding a chain together, and thought it would be excellent to try Free All. After soaking the bolt threads and nuts, I was able to unthread the nuts with my fingers. AWESOME!

— Kevin Gray, Wilton, Maine

I use Free All everyday as a mechanic for a power equipment company. Free All saves me so much time and allows me to provide the best service in return. I am so thankful a salesperson introduced me to this product!

— Jacob Bryant

I’ve been a diesel mechanic for 40 years, and I’ve used a lot of penetrating oils in that time. Free All is easily the best I’ve come across so far. You don’t need to use much of it and it works incredibly fast, which saves me on oxygen and acetylene. It even smells good! I’ve put Free All to the test over and over again and it proves itself every, single time. Think the one you’re using is better? Put your money where your mouth is and buy some Free All. You won’t be sorry!

— Ernie Melton, Cedar Hill, TX

This is a great product. I used it on a farm implement machine (sprayer) and the nuts and bolts were easily removed - faster than with WD-40 or P.B. B'laster! I think your product is good!

— Randy Brandon, Meadville, Missouri

All of our techs like it [sic]…it works great!

— Crane’s Auto Service, Honeoye Falls, New York