Testimonials
See what other customers are saying about Free All.
Professional Automotive
“The BEST penetrating oil I've used in the 37 years I've been in business!”
-Glenn York, Glenn York Auto Repair, Sidney, OH
“Being a mechanic for the past 39 years, I have a good idea about what bolts and nuts need to be sprayed with lubricant to loosen. I used a 1992 Dodge 350 Ram 4x4 - dragged out of the weeds after more than three years - and it was a good test!! I went out and sprayed the bleeders on the calipers and drums, went back in the house, fixed a cup of coffee, and went back out. They broke freely with almost no effort at all!!! I absolutely recommend it.”
-Dale Watson, Addison, New York
“I am employed by a new car multi-line dealer as a parts person. Over the past 25 years, I've seen and used many rust penetrating chemicals. This product works the first time; there is no wasted time in applying additional applications. Simply put: it's priced right and it works. Technicians won't complain about this chemical. Trust me.”
-Gary Schau, Buffalo, New York
“I work for the Trane Co. in Greenville SC, the leader in A/C equipment. While working in NC at a Sears store we had an air handler that had a fan shaft go bad on a very large cast iron squirrel cage fan that had been in service for over 20 years. After two cans of WD-40 and 3 hours of work, we couldn't get the shaft to budge.
The next morning, with the smell of WD-40 in the air, I sprayed some Free All in the hub holes and got a cup of coffee.
When we got back, I smacked a board against the shaft end 3 times and that shaft went flying through the fan hub and out the other side. My partner just looked at me and asked if I had bought a can of Free All for him, too. Like the sign at Cline Company says, it really does "FREE EVERYTHING BUT CONVICTS". In fact, it’s all I keep on my truck.”
-Greg Kazian, Greenville, South Carolina
Acrometal Company, Inc.
“Free All made a believer out of me! One of my maintenance mechanics brought me a shaft with a sheave he could not get off…in fact, he broke a bearing puller while trying. We sprayed some Free All on the sheave and shaft and went to lunch…joking that if this stuff were any good we shouldn’t even need a puller to get it off.
When we got back from lunch, I put my hands around the sheave and pulled it right off. It blew everyone’s minds! I ordered a case and we have been using it ever since. I have used several different penetrants in the past, but nothing seems to compare with Free All.”
-Bob Imgrund, Maintenance Supervisor, Acrometal Company, Inc
“It worked and worked and worked. We used it on everything; screw heads, overhead doors…the can is empty.”
-Ray, Monroe Muffler, Rochester, New York
“That stuff is awesome, it really works great!”
-Monroe Muffler Shop, Fairport, New York
“Works pretty damn good if I do say so myself. I used it on some rusty bleeder screws on brakes, and it was the only thing that worked! It is a phenomenal product.”
-Joe, Monroe Muffler, Buffalo, New York
“All of our techs like it…it works great!”
-Crane’s Auto Service, Honeoye Falls, New York
DIY Automotive
“I'm not usually a 'letter to the maunfacturer' writer, but in this case I am motivated.
I bought a flooded multipurpose tool and have been in the process of trying to restore it to working condition. It's a mess, having sat unattended for probably two years. Rust, bi-metallic corrosion, more rust; you name it.
I started trying to disassemble it with Brand X, because that's what I had on hand. Just created frustration.
Bought your product, it was delivered last night. I snuck out into the garage, and sprayed some Free All on an aluminum split sheave corroded to a steel shaft. I had little hope, anticipated having to replace the parts.
Came back an hour later, and the previously corrosion-welded parts were practically crawling away from each other. Yahoo! Absolutely amazing product and result!
Thank you for putting out a product that actually does what it claims. Doesn't happen often. And yes, I will be passing the word!”
-Tom Gould
“I would recommend this product to anyone who is frustrated with rusted and tight bolts and nuts. One spray of Free All Deep Penetrating Oil and, in seconds, you can twist a wrench on it. I’ve used other penetrating oil products but not anymore. Free All is the best. And the price is a small one to pay for something that works this well.”
-Kurt Carpenter, Bowling Green, Ohio
“I am recommending this product to everyone I know. WD-40 is obsolete now – thanks to Free All Deep Penetrating Oil!”
-Michael Winters, Dixon, Illinois
“This product works better than any penetrating oil I have ever used. I used it for an old exhaust and literally watched the rust melt away.”
-Michael Russell, South Bend, Indiana
“I have used several similar products but none have impressed me like Free All. The name depicts exactly what it does. I have been a mechanic for many years; I have compared thoroughly three different products besides Free All. This stuff is truly incredible – especially on exhaust and other fasteners. This stuff is in a league all by itself. Great product. I wish this stuff was around years ago. It would have saved a lot of busted knuckles.”
-William Gross, Valparaiso, Indiana
“My test results were quite effective. The penetrating power was superior to any other Deep Penetrating Oil I’ve used on the market. I want more.”
-John H. Simmons, Boonville, Indiana
“The Free All Deep Penetrating Oil arrived just at the right time. I was taking bumpers off of an 1982 El Camino. The bolts were rusted on. The oil worked great.”
-Kenneth Kilcore, Browns Mills, New Jersey
“I am rebuilding a 1950 Chevy ½ ton. There are a lot of rusted bolts that are tight. The ‘Free All Deep Penetrating Oil’ cuts and dissolves the rust in minutes making it easy to remove the bolts. I would recommend it to anyone for removing tight rusted bolts.”
-Robert Allison, New Galilee, Pennsylvania
“I had some brake caliper bolts that were hard to break. I sprayed on Free All, waited a couple of minutes, and they broke free. Good stuff! I have used lots of penetrating oils – and this one is great!”
-Mike Corcoran, Cincinnati, Ohio
“It came in an aerosol can the same week that I broke a ball joint on my 1994 pickup. The ball joint was an original equipment item, riveted in the factory. I soaked the ball joint with Free All, and 10 minutes later, I got to work. The ball joint came right out with one hit of the hammer.”
-Dustin Wells, Reading, Pennsylvania
“After spraying a rusted pair of vise grips with many different products – with no luck – I sprayed them with Free All and had the vise grips working in no time flat. Until I used Free All, I was ready to give up and throw them away. Now the vise grips are working fine, and I didn’t have to buy a new pair.”
-Frank Koval, Somerset, Pennsylvania
“I would recommend this product based on the results I got. I use P.B. Blaster in my garage and in five of our shops. This product is as good, if not better, without the odor and foam action. I used Free All on an old gas grill to remove and replace the bolts on the grill that were covered with years of heat and grease. The bolts came right off after I sprayed them.”
-Steve Essman, Hoyt, Kansas
“I used Free All on bolts that were unable to break loose with other penetrating oils. It freed them in a matter of minutes. This is the greatest rust eater I have ever used! Then I used it to remove rust on my own tools and it worked great!”
-Ron Mote, Piqua, Ohio
“A friend was trying to remove a gas tank from a 1993 Blazer. Sprayed with WD-40, a day later, nothing – the bolts were frozen. Sprayed again with Free All and a half an hour later, the nuts broke loose. This stuff is terrific. He still can’t believe it worked that good.”
-Michael Winters, Dixon, Illinois
“When I walked out the door with the can, I sprayed the hinge on the door and to this date (2 weeks later), no more squeaking. Works fantastic on rusted bumper bolts!”
-Donald Felger, Fort Wayne, Indiana
“After using Free All on a pair of bolt cutters that were lost for three or four years out in the weeds, the first spray made them work like new. When I used it on a stuck highstack cylinder, it loosened up on the first try. I have only had to spray once on anything I have used it on.”
-Frank Fleischmann, Hillsboro, Missouri
“Free All is an excellent penetrating oil – after spraying it on some rusty bolts, I could immediately see the rust dissolving off of them. Excellent product. It works as well if not better than any other penetrating lube I have used.”
-Jim Fuhrman, Granite City, Illinois
“I can’t wait to order some more of this stuff! The day it came, I was sorting old nuts and bolts in my garage. I applied some of this oil to the rusty pile of parts and it cleaned the rust off and made all of these parts useable again! Now I use it everywhere!”
-Richard Hebner, Rochester, New York
“The enclosed business card said it all! ‘This stuff will amaze you!’ Frees everything without torches or hammers. I was able to free rusted bolts on my 1954 MG with Free All. I let it soak in and the bolts loosened right up.”
-Edward J. Andrew, Orland Park, Illinois
“I used Free All on some badly rusted studs on an exhaust manifold. I sprayed the studs and nuts liberally and let it set for a couple of hours. I then was able to remove all the studs and nuts without any breaking! I believe I would rank this product as slightly better than P.B. B’laster and years ahead of WD-40.”
-Edwin Wilt, Altoona, Pennsylvania
“The product does what the name implies. This product does work better than other penetrating oils I’ve used before.”
-Ray Demers, Bethels, Connecticut
“I’ve been a loyal user of B’laster for years, but I gave Free All a try on an engine I was pulling out of an old El Camino. My first shot was to the studs on the exhaust manifold. Wow! I usually end up breaking at least one of the six off. I could not believe how easy the nuts broke loose with only a 3/8-in. drive socket. It made a true believer out of me.”
-Loren Black, Cuyahoga Falls, Ohio
“I used Free All and P.B. B’laster on one of my vehicles. I am doing an engine swap. The rusty bolts that I used Free All on came loose easier than ones I used the other stuff on.”
-Dan Hopkins, Binghampton, New York
“This product worked great! I had some rusted bolts holding a chain together, and I thought it would be excellent to try Free All on. After soaking the bolt threads and nuts, I was able to unthread the nuts with my fingers. AWESOME!”
-Kevin Gray, Wilton, Maine
“I’ve used P.B. B’laster before and it worked ok, but this worked much better on similarly rusted and frozen nuts and bolts.”
-John Shepherd, Topeka, Kansas
“It works great and no foul odor like most rust removers so it can be used everywhere!”
-Ron Mote, Piqua, Ohio
“It just plain works! It didn’t fail to do its job. Rust? No problem. Over-torqued? No problem. I took it to work and used it to prevent galling on stainless to stainless fasteners and it worked great! And you can use it on the interior parts of your car without stinking the place up.”
-Jay Shilcutt, Wichita, Kansas
“This is one product that really works as advertised. I tested it on rusty fuel lines and brake lines against P.B. B’laster. Free All worked twice as fast and really did the job.”
-Charles Carroll, Morrow, Ohio
“After swearing at the broken rear brake line on my ol’ rust bucket 1976 F150 pick-up, I sprayed a little Free All on each rear brake bleeder of this old truck and hoped for the best. I crawled out from under the truck and winter slush and went for a cup of coffee. When I returned from my coffee break I got back under my bucket of rust and to my surprise, both unscrewed like they were put on the day before! OH What A Happy Day!!!”
-Brian Schultz, LaPorte, Indiana
“I appreciate having high quality tools and products. Free All Deep Penetrating Oil stands shoulder to shoulder with the rest of my tools.”
-John H. Simmons, Boonville, Indiana
“I have been using Free All for about 11 years & it’s the best penetrating oil on the market!!!”
-Janelle Lafaver, Fallbrook, California
"I bought an old 1976 Corvette - my dream cruising car, actually. Well, you just couldn't imagine all the rusty parts this thing had on it! My dream of driving around with the T-tops off quickly turned into a real nightmare...that is until a friend of mine gave me a can of Free All. Those rusty corroded parts were no match for this magic stuff! No need to get the blow torch out and the summer is looking real good now!"
-Mike "Meatball" Artale, Lakewood, Ohio
“I drive a ’95 Jeep 2.5L and the 1-1/2 bolt on the manifold is known to need a torch to loosen or it will either bust or not come off at all. I used PB Blaster®, Liquid Wrench® and Snap On® penetrating oils. None of them loosened the bolt at all. Then I sprayed on some Free All, left it sit a few minutes and turned it out and off like it was new. Your product worked great!”
-Jason Abbey, Wayland, New York
“I’ve been using Free All for 10 years.
I have a stubborn, bull-headed mule of a friend that operates a repair shop for cars and small trucks. He was working on a 1970 Buick and couldn't get two 5/16 bolts that screw into the flange on the rear of the muffler to budge.
I suggested Free All to him and his answer was, “I’ve tried all that squirt stuff…you’re better off peeing on it.” I persuaded him to try Free All and we waited for approximately 20 minutes. When I suggested it was time to try the bolts, he said he might as well get the torch and heat them. But he was willing to give it a try and he took the same wrench and took out both bolts with ease. From that moment on, he was a true believer in Free All and has purchased it ever since.”
-Wayne Smith, Tiffin, Ohio
Industrial
Marine
Heavy Duty
“I promised to report back on my experiment with Free All. This stuff works great, friends and neighbors! Very happy, very happy, very happy! I turned a sparkplug that had soaked for about week, and it turned easily! I turned my attention to one of the loaders hydraulic fittings that was badly rusted and dry. I tried to turn it with a wrench and it wouldn't budge. I sprayed a little Free All and ten seconds later it started to move (with a little persuasion).”
-Farmall Cub post, http://www.farmallcub.com/phpBB2/viewtopic.php?t=24766&highlight=free
“This is a great product. I live on a farm, and I used this on a farm implement machine (sprayer). The nuts and bolts were easily removed - faster than with WD-40 and P.B. B'laster! I think your product is good!”
-Randy Brandon, Meadville, Missouri
